AEM Performance Cold Air Intake System 21-518C
30 days returnmoney back
The AEM 21-518C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Fit models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the inlet air temperature sensor and a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal.
2007-2008 Honda Fit 1.5L L4
Fitment Note: With Maunal Trans
30-day money-back guarantee
Free Shipping in U.S.
2007 Honda Fit 1.5L L4
2008 Honda Fit 1.5L L4
Fitment Note: With Manual Trans
AEM Air Intake System and Dryflow™ Air Filter Limited Warranty
AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.
AEM Universal Air Intake Systems Warranty
AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase.
PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.