AEM Performance Cold Air Intake System 21-679DS
30 days returnmoney back
The AEM 21-679DS Performance Cold Air Intake System replaces the restrictive factory air filter and air intake housing in some Mitsubishi Lancer models. The air intake system comes with a black rubber topped AEM high-flow air filter that installs near the driver-side wheel well. Air is directed through a free-flowing, mandrel-bent aluminum tube and then through a custom tuned, high-density polyethylene intake tube that connects to the engine’s throttle body. This lower restriction intake is designed to increase horsepower and acceleration. The AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before servicing is needed (depending on driving conditions). The intake tube accommodates factory emissions control devices including a vent hose and the mass air sensor. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
2008-2014 Mitsubishi Lancer 2.0L 2.4L L4
30-day money-back guarantee
Free Shipping in U.S.
2008 Mitsubishi Lancer 2.0L 2.4L L4
2010 Mitsubishi Lancer 2.0L 2.4L L4
2011 Mitsubishi Lancer 2.0L 2.4L L4
2012 Mitsubishi Lancer 2.0L 2.4L L4
2013 Mitsubishi Lancer 2.0L 2.4L L4
2014 Mitsubishi Lancer 2.0L 2.4L L4
AEM Air Intake System and Dryflow™ Air Filter Limited Warranty
AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.
AEM Universal Air Intake Systems Warranty
AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase.
PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.