0
Your cart is empty!
1 800-951-3955
MONDAY–FRIDAY 9AM – 6PM CST

AEM Charge Pipe Kit 26-3001C

Dealer Part: 26-3001C
UPC: 024844361554

344.99 344.99 USD

344.99

Add to Cart

30 days return

money back

free Shipping!


lowest price

guarantee

safe shopping

guarantee

The AEM 26-3001C Intercooler Charge Pipe Kit is a set of two free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbocharged Ford Mustang EcoBoost models that support a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbocharged air pressure loss as well as dramatically increase airflow from the turbo to the intercooler. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. The hot charge pipe features a precision machined fitting that accommodates the factory BOV (blow-off valve). The cold charge pipe has two provisions for 1/8 inch NPT ports for you to optionally add either a water-methanol or a nitrous oxide injection system along with a temperature/boost sensor probe for these modifications. The AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, the AEM 21-740C Cold Air Intake System can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. 

Features

  • Increases horsepower and acceleration

  • Ports can accommodate water-methanol or nitrous oxide injection kits

  • Low restriction aluminum tubing

  • AEM Lifetime Limited Warranty

AEM 26-3001C Product Specifications

  • Estimated Horsepower Gain 19 HP @ 5500 RPM

  • California Restricted Not legal for sale or use in California

  • Color Gunmetal Gray

  • Package Contents 1 Intercooler Pipe

  • Product Box Height 11.6 in (295 mm)

  • Product Box Length 24.38 in (619 mm)

  • Product Box Width 12.2 in (310 mm)

  • Product Style AEM Intercooler Pipe

  • Street Legal In All US States No

  • TUV Approved (Europe) No

  • Weight 6.8 lb (3.1 kg)


30-day money-back guarantee
Free Shipping in U.S.


Leave a comment

You must be logged in to post a comment.

2015 FORD MUSTANG 2.3L L4 F/I - All

2016 FORD MUSTANG 2.3L L4 F/I - All

2017 FORD MUSTANG 2.3L L4 F/I - All

AEM Air Intake System and Dryflow™ Air Filter Limited Warranty

AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.

AEM Universal Air Intake Systems Warranty

AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase. 

PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.