AEM Brute Force Cold Air Intake 21-9113DP
30 days returnmoney back
AEM designs its Brute Force air intakes for popular trucks, SUVs, and late-model, fuel injected muscle cars, and dyno-tunes each system to produce more torque and horsepower for large displacement engines.
AEM's mechanical engineers emphasize tuning the resonance properties of designs that include an aluminum inlet pipe to help carry more air to the intake valves. In a few designs, AEM uses a molded High-Density Polyethylene tube which allows their engineers to route incoming air in more creative ways. AEM routes their plumbing so that the filter draws air from a safe and cool location. Many designs include a steel powder coated heat shield to shroud the filter from engine heat and road dirt. Every BRUTE FORCE truck cold air intake AEM makes is guaranteed for the life of your vehicle.
AEM's R&D testing procedures and quality-first manufacturing processes set our intakes apart. But what makes their air intakes better is they deliver more torque and horsepower while providing superior filtration and performance using our AEM's Dryflow® synthetic air filter. Combine this with a steel heat shield, reinforced brackets, unmatched looks and a lifetime guarantee, and it's easy to see why AEM BRUTE FORCE Cold Air Intakes deliver the most "Air Power
Designed for trucks, SUVs and fuel injected muscle cars
Assists large displacement engines to produce more horsepower and torque
Fast and easy to clean
DryFlow® oil-free synthetic filter media
Reusable, washable and easy to install
Up to 100,000 miles of use before cleaning needed
Aluminum inlet piping pulls air from a cool and safe location
Guaranteed for the life of your vehicle!
30-day money-back guarantee
Free Shipping in U.S.
2004 FORD EXCURSION 6.0L V8 DSL - All
2004 FORD F250 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - All
2004 FORD F250 SUPER DUTY 6.0L V8 DSL - All
2004 FORD F350 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - All
2004 FORD F350 SUPER DUTY 6.0L V8 DSL - All
2004 FORD F450 SUPER DUTY 6.0L V8 DSL - All
2004 FORD F550 SUPER DUTY 6.0L V8 DSL - All
2005 FORD EXCURSION 6.0L V8 DSL - All
2005 FORD F250 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - All
2005 FORD F250 SUPER DUTY 6.0L V8 DSL - All
2005 FORD F350 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - All
2005 FORD F350 SUPER DUTY 6.0L V8 DSL - All
2005 FORD F450 SUPER DUTY 6.0L V8 DSL - All
2005 FORD F550 SUPER DUTY 6.0L V8 DSL - All
2006 FORD F250 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
2006 FORD F250 SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
2006 FORD F350 HARLEY DAVIDSON SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
2006 FORD F350 SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
2006 FORD F450 SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
2006 FORD F550 SUPER DUTY 6.0L V8 DSL - Built Before 7/30/07
AEM Air Intake System and Dryflow™ Air Filter Limited Warranty
AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.
AEM Universal Air Intake Systems Warranty
AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase.
PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.