AEM Charge Pipe Kit For Cold Air Intake 26-3003C
30 days returnmoney back
The AEM 26-3003C Intercooler Charge Pipe Kit is a free-flowing, mandrel-bent aluminum tube designed to replace the restrictive factory intercooler piping on specific turbocharged Honda Civic models. The AEM charge pipe has been engineered to reduce turbocharged air pressure loss as well as dramatically increase airflow from the turbo to the intercooler. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. This cold side charge pipe has two provisions for 1/8 inch NPT ports for you to optionally add either a water-methanol injection or a nitrous oxide modification. The AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, the AEM 21-798C Cold Air Intake System can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty.
2016-2017 Honda Civic 1.5L L4
Increases horsepower and acceleration
Allows for the use of after-market bypass or blow-off valves
Low restriction aluminum tubing
Easy to install using commonly available tools
AEM Lifetime Limited Warranty
Goes well with AEM 21-798C Cold Air Intake System
30-day money-back guarantee
Free Shipping in U.S.
2016 Honda Civic 1.5L L4
2017 Honda Civic 1.5L L4
AEM Air Intake System and Dryflow™ Air Filter Limited Warranty
AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.
AEM Universal Air Intake Systems Warranty
AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase.
PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.