AEM Performance Cold Air Intake System 21-814C
30 days returnmoney back
AEM Cold Air Intake Performance System
AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota Corolla models. The oversized cone-shaped AEM Dryflow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This system puts the air filter low and towards the front of the car on the driver's side where cooler air can be found. Cooler and denser air is then channeled through the mandrel-bent aluminum intake tube into the throttle body. The factory PCV and MAP sensor mount directly on the intake tube. Included is an extension harness for the MAP sensor and other hardware for installation. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal.
2017 Toyota Corolla 1.8L
30-day money-back guarantee
Free Shipping in U.S.
AEM Air Intake System and Dryflow™ Air Filter Limited Warranty
AEM warrants that its air intake systems and Dryflow™ air filters will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. On air intakes AEM will not warrant its powder coating if the finish has been cleaned with a hydrocarbon-based solvent. The powder coating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM part is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.
AEM Universal Air Intake Systems Warranty
AEM racing, universal intake kits are sold for racing and off road use and are warranted against defective materials or workmanship for one year only from the date of purchase.
PROOF OF PURCHASE REQUIRED: Our warranty covers the original purchaser of an AEM product who has provided proper proof of original retail purchase.