aFe Large Bore 5" Stainless Exhaust w/Polished Tip 49-46112-P
30 days returnmoney back
This LARGE BORE HD exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Finishing off the exhaust is a 6" diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.
Constructed from 5" mandrel-bent aluminized steel tubing
Uses a high-quality band clamp and OE-style bayonet hangers for a secure fitment
Utilizes all factory mounting locations to provide a quick, hassle-free installation
Included in this exhaust system is a massive 5" Dia. polished stainless steel intercooled tip with a laser-cut stainless steel aFe power badgeTesting, up to 65% increase in flow
Fits Crew Cab/Standard Bed (151.6" Wheelbase/6'6" bed)
30-day money-back guarantee
Free Shipping in U.S.
2016 Nissan Titan 5.0L Cummins Crew Cab 6'7" Bed
2 Years Warranty
All warranty is limited only to the repair and/or replacement of the aFe product. Under no circumstances will the obligation or liability of aFe exceed the purchase price of the product as indicated on the original bill of sale. aFe excludes and disclaims any liability or obligation for incidental or consequential damages and cost related to such damages including but not limited to installation, removal or repair labor, rental vehicles, tow or any other inconvenience costs. Such costs will be the responsibility of the vehicle owner. aFe does not warranty any open box, used or items purchased from third-party eBay sellers.
• Turbochargers that have been opened or modified• Any products that have been cut, welded, or modified
• Any Scorcher Electronics that have been installed and non-defective
If you are going to return any product back to aFe, you must first receive an RGA (Returns Good Authorization) number and write that number on the box you are returning, along with a copy of the RGA sent to you. All shipments being returned to aFe must be shipped prepaid by the customer. If you are requesting a replacement part, you must first receive an RGA and aFe must receive the item for inspection. After review of the product returned and approval by our returns department, aFe will then send a replacement item. aFe will not send any replacement part before receiving the warranty return.
No other warranty expressed or implied applies nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some States do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.