aFe Power BladeRunner GT Series Turbocharger 46-60052-1
30 days returnmoney back
This turbo can be installed on 2003-2007 model years as a direct bolt-on replacement. All connections to the vehicle are compatible with the OE geometry, resulting in a quick and reliable connection. Maximum gains are achieved from fuel system upgrades, either electronic or mechanical. The compressor features a light-weight billet aluminum compressor wheel with a 60mm inducer and 89.7mm exducer to improve turbo spool-up, handle high wheel speeds, and boost pressures. Also included is a CNC-machined, black anodized billet adjustable aluminum wastegate actuator.
2003-2007 Dodge Ram Cummins 5.9L
+51 HP and +124 lbs. x ft. Torque max gains, verified by our in-house dyno*
Stock replacement with no core charge
A direct bolt-on replacement; all connections to the vehicle are compatible with the OE geometry
Additional fueling is not requiredBillet adjustable wastegate actuator included, comes preset to 40 PSI
30-day money-back guarantee
Free Shipping in U.S.
2003 Dodge Ram 2500 3500 5.9L Cummins
2004 Dodge Ram 2500 3500 5.9L Cummins
2005 Dodge Ram 2500 3500 5.9L Cummins
2006 Dodge Ram 2500 3500 5.9L Cummins
2007 Dodge Ram 2500 3500 5.9L Cummins
2 Years Warranty
All warranty is limited only to the repair and/or replacement of the aFe product. Under no circumstances will the obligation or liability of aFe exceed the purchase price of the product as indicated on the original bill of sale. aFe excludes and disclaims any liability or obligation for incidental or consequential damages and cost related to such damages including but not limited to installation, removal or repair labor, rental vehicles, tow or any other inconvenience costs. Such costs will be the responsibility of the vehicle owner. aFe does not warranty any open box, used or items purchased from third-party eBay sellers.
• Turbochargers that have been opened or modified• Any products that have been cut, welded, or modified
• Any Scorcher Electronics that have been installed and non-defective
If you are going to return any product back to aFe, you must first receive an RGA (Returns Good Authorization) number and write that number on the box you are returning, along with a copy of the RGA sent to you. All shipments being returned to aFe must be shipped prepaid by the customer. If you are requesting a replacement part, you must first receive an RGA and aFe must receive the item for inspection. After review of the product returned and approval by our returns department, aFe will then send a replacement item. aFe will not send any replacement part before receiving the warranty return.
No other warranty expressed or implied applies nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some States do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.