aFe Power Mach Force-Xp 3" Cat Back Sport Toned Exhaust System 49-33087-P
30 days returnmoney back
This cat-back exhaust system utilizes full 3” tubing with 2-1/4” clamp-on reduction tubes to fit OE connections. Remove them and combine with the aFe Power Twisted Steel long tube headers and connection pipes (P/N: 48-33012-YC) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe with resonators to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4" polished 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation.
+12 HP / +10 lbs ft of Torque Max Gains
Constructed of 3" mandrel-bent stainless steel tubing for unrestricted flow
Incorporates an X-Pipe with resonators to balance and evenly distribute exhaust pulses
Includes 4" dual, double wall, polished tips
Made in the USA
30-day money-back guarantee
Free Shipping in U.S.
2015 Ford Mustang 3.7L V6 / 5.0L V8
2016 Ford Mustang 3.7L V6 / 5.0L V8
2017 Ford Mustang 3.7L V6 / 5.0L V8
2 Years Warranty
All warranty is limited only to the repair and/or replacement of the aFe product. Under no circumstances will the obligation or liability of aFe exceed the purchase price of the product as indicated on the original bill of sale. aFe excludes and disclaims any liability or obligation for incidental or consequential damages and cost related to such damages including but not limited to installation, removal or repair labor, rental vehicles, tow or any other inconvenience costs. Such costs will be the responsibility of the vehicle owner. aFe does not warranty any open box, used or items purchased from third-party eBay sellers.
• Turbochargers that have been opened or modified• Any products that have been cut, welded, or modified
• Any Scorcher Electronics that have been installed and non-defective
If you are going to return any product back to aFe, you must first receive an RGA (Returns Good Authorization) number and write that number on the box you are returning, along with a copy of the RGA sent to you. All shipments being returned to aFe must be shipped prepaid by the customer. If you are requesting a replacement part, you must first receive an RGA and aFe must receive the item for inspection. After review of the product returned and approval by our returns department, aFe will then send a replacement item. aFe will not send any replacement part before receiving the warranty return.
No other warranty expressed or implied applies nor is any person or advanced FLOW engineering authorized to assume any other warranty. Some States do not allow the exclusion or limitation of incidental or consequential damages or do not allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.