Bak Industries BAKFlip F1 Hard Folding Tonneau Cover 772331
30 days returnmoney back
The BAKFlip F1 is a step up from the BAK Fibermax. With this upgrade, you get increased impact resistance, upgraded latch housing and components, and all-new integrated tailgate seal. The F1s rugged design is made to perform in severe working and weather conditions. Rain, hail or snow - the F1 has you covered. Quickly and easily fold and lock the cover in the flipped up position for hauling large loads. The F1s advanced infrastructure and upgraded components provide unrivaled strength and security.
Universal tailgate operation with dual action seal
Premium density foam core
Heavy duty hardware and components
Rated up to 400 pounds of evenly distributed weight
Automatic latching panels
100% truck bed access when folded
3 Year Warranty
30-day money-back guarantee
Free Shipping in U.S.
2017-2018 Ford F-250 F-350 8' Bed
BAK® Industries (“BAK”) warrants your BAKFlip F1 Tonneau Cover Overview to be structurally free from defects in material and workmanship for 3 Year Limited Warranty period from the retail date of purchase. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) required for warranty service. Warranty is nontransferable and applies to the original purchaser of the BAK product only.
BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God or normal wear and tear or other causes not arising out of defective materials or workmanship. BAK assumes no liability for injury, loss, incidental or consequential damages. BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.
BAK is committed to providing you with our best service at all times. Please feel free to contact us should you require any assistance with your BAK product.
Care and Maintenance
BAKFLIP G2, HD, FIBERMAX AND F1
BAK Flip tonneaus are made from durable materials and require simple care to ensure a long life of performing well and looking great.
Cleaning the Top (Washing)
Standard automotive soap and water with a soft sponge or cloth is recommended for cleaning. Shammy dry to keep the finish polished and brilliant. Wax is NOT recommended as it tends to fill in cracks and crevices, which may affect the textured panel finish. Do NOT use any harsh cleaners or abrasives.
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough roadways can cause the cover to require adjustment.
Lubricating the Latches
It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around the latch location.