WeatherTech CupFone™

$34.95

WHAT DO YOU DRIVE?
Search Your Vehicle

Have a Question? 1 800-951-3955
Talk to an expert Live Chat
We can't find products matching the selection.

    Description

    More Information

    Video

    WeatherTech CupFone™

    A Universal Smart Phone Holder that Fits into just about any Cup Holder in Any Vehicle

    It’s simple. It’s effective. And it’s universal. If you need a phone mount for your vehicle, the CupFone™ (pronounced “Cup Phone Tee Mmmm”) from WeatherTech will most likely be able to handle your phone and your vehicle, no matter what device or truck you own. And its intuitive cup-holder design makes matching it up with your vehicle’s cup holders a cinch.

    Bullet Point Breakdown of the CupFone™

    No time to read this whole article? Just want the quick and dirty dets? “Too long; didn’t read” you’re fav acronym? Don’t worry. We hear ya. Here’s our Midwest Aftermarket Bullet Point Breakdown of the WeatherTech CupFone™:

    • A Smart Phone Mount that will fit virtually any cup holder in any vehicle
    • Great for trucks, Semis, RV’s, Boats, even Golf Carts
    • An easy to use Universal phone mount
    • Designed with hands free use in mind
    • A fully adjustable phone holder, regardless of phone size
    • Works with just about any smart phone on the market
    • Adjusts to fit phones from 2.375 inches wide to 3.375 inches
    • Can handle phones that are up to .5625 inches thick
    • Leaves the phone charging port free so you can charge on the go
    • No need to disconnect the charger when you pick up or put down the phone either
    • Base can be rotated 360 degrees, so you can use the device from any angle
    • Tiltable, a true hands-free phone holder, lets you adjust the mic position with ease
    • A phone holder that fits in your cup holder
    • Doesn’t require permanent install.
    • Can be taken with you and used on the go!
    • Knob on the back can easily lock your phone in position as you’d like
    • Dreamed up and manufactured right here in the US of A by WeatherTech
    • A smart phone mount for your car, desk, or just about anywhere
    • The last cell phone holder / phone mount you’ll ever need to buy.

    The CupFone™

    Whether you enjoy chatting up your bestie while driving down the road or use navigation apps like Maps or Waze on your daily commute, you need some kind of hands free phone mount these days.

    The first and only phone mount that fits in your cup holder, the CupFone™ is truly universal. It can handle a phone that is 3 ⅜” wide, wider than any phone in production as of this writing, and can even handle many phones that have cases on them.

    Designed to cradle your smart device, the CupFone™ can handle any touch screen phone between 2 ⅜” and 3 ⅜” wide and up to 9/16” deep or .5625 inches deep. We are talking about a mount that can truly handle just about any phone currently in production.

    What phones can the CupFone™ handle currently?

    The CupFone™ can easily hold some of the largest and most popular phones currently on the market, including all of the following devices:

    • Google Pixel 3XL
    • iPhone XS Max
    • Samsung Note9
    • iPhone X
    • OnePlus 6T
    • Samsung Galaxy S10
    • Galaxy S9 Plus
    • iPhone 8
    • Huawei Mate 20 Pro
    • Samsung Galaxy S10+
    • Xiaomi Redmi Note 7
    • and many many more!

    If you’re like me, you’ve probably had a string of cell phone mount misadventures. Whether it’s a mount for your iPhone or your Pixel 2 XL, most of the holders I have had are either too small or too flimsy for the devices I use on the daily. So what are you to do when the ever popular air vent mounted phone holder just won’t cut it anymore? How are you supposed to react when your brand spanking new, release date still pending, super duty smart phone doesn’t fit in your mount or breaks the mount off of the vent while you’re flying down the road doing 75, asking Google Assistant if you just missed your turn off to go to the Mac store to get your new iPod mini touch what’sit. What are you to do then, man?

    I’ll tell you what to do. You get with the program and subscribe to a music streaming service, turn on navigation voice commands, step on the gas cause you’re still 2 miles away from your exit, and you order one of these universal phone mounts from WeatherTech--the CupFone™, the only universal portable cell phone holder that still lets you use your headphone jack and your charger while the phone is mounted.

    So how does the CupFone™ work? Do you have to permanently install it?

    Very well and no, respectively, sir. The CupFone™ simply slides into whatever cup holder you want it in. And my first thoughts were remembering when my wife bought me a massive Yeti coffee mug and it wouldn’t fit in one of my cup holders in my truck, so I about spilled flaming hot coffee all over myself as I hit some potholes on my way to work.

    But the CupFone™ was ready for that inevitability too. She comes with four inserts or plastic cups that allow you to adjust the CupFone™ to fit whatever size cup holder is standard in your vehicle. Not only is this ingenious, making the CupFone™ fit snugly in whatever vehicle your rocking, but it also makes sure you have a great fitment to prevent the phone or the mount from tipping over or falling out.

    Likewise, there are two knobs on the mount itself. The one on the back allows you to increase or decrease the width of the CupFone™ mount so that your device will fit perfectly. This makes sure that your expensive smart phone doesn’t go flying out when you hit a bump or take a sharp turn. This CupFone™ is going to hold your phone in place safely and securely.

    Next, you’ll probably notice the hole in the bottom of the cradle. This is so you can attach auxiliary jacks if your phone has them and / or charging cables without having to pull your smart phone out of the phone mount. Nothing worse than having a fancy phone and a fancy mount, but finding out you can’t listen to tunes or charge your device while using the cradle to hold it. This is what makes the CupFone™ such a great device.

    Finally, that second knob is designed to adjust the viewing angle of your phone. We realize that every vehicle is different. So if you want to design a truly universal mount that fits in a cup holder, you need to be prepared for the fact every vehicle has cup holders in different places. If your cup holder is down low, near your waist or knees, you can adjust the angle so your device is facing up towards your head. If your cup holder is at more shoulder level, you can tone that angle down some. And if you have a cup holder up next to your steering wheel--every man’s dream cup holder location, am I right?--then you can make it so that your phone is almost perpendicular, straight up and down, so you can easily glance at your Waze app and avoid that traffic cop up ahead.

    Brilliant, we say! How can I get one?

    You can order your CupFone™ today from Midwest Aftermarket for starters. But I’ve still got one more huge feature that may have gone over looked.

    You see, I used to have a knock off phone mount that was kinda similar to this amazing cup holder device. So for starters, buyer beware. Not only was this device cheap, but it was cheaply made. And when I took a sharp turn, it slide right out of the cup holder. It had a little slot or opening below the cradle for charging cables and such, but when you went to remove the phone, you had to unplug the cable too or it would get stuck in that hole. It was, needless to say, a real pain in the butt to use.

    So whether you’re buying directly from us or hitting the eBay, please make sure you get the authentic WeatherTech CupFone™ and not some random knock off.

    For me, the real game changer here was the charging cable and aux cord opening. Whereas on that knock off the opening was literally a hole in the bottom of the mount, on the CupFone™ the entire middle section of the cradle is open. This simple yet super smart design feature is what allows you to keep the charger plugged in while you insert or remove the phone from the cradle. For me, this changed how I used my device. Whereas before I was always nervous to use my phone for music or for navigation apps like Waze or Google Maps, now I could charge my device, have an auxiliary jack plugged into my stereo and still be completely hands free.

    I have got to tell you, WeatherTech’s CupFone™ has made me a safer driver because I know exactly where my phone is and I’m truly hands free now. If only all of us could use this great device, we’d likely reduce distracted driving incidents exponentially. And since they are made right here in the US, your purchase is supporting American workers too. If that’s not a win-win, I don’t know what is.

    Our Promise of Exceptional Service and the Lowest Prices on the Interwebs

    When you’re ready to order your WeatherTech CupFone™, we hope you’ll get yours from us here at Midwest Aftermarket. We only promote products we believe in and sell them at the lowest prices, shipping quickly to you for free if you’re in the lower 48 states. We have an excellent return policy and strive to get you the right product in perfect condition the first time.

    What are you waiting for? Give us a call or place an order directly through our website. We’ll get your product out to you ASAP so you can enjoy your vehicle and make it your own. If you have a vision of what your truck or Jeep could be, let us help you achieve that image, that goal. We put aftermarket right at the tip of your fingers on your smartphone, web browser, and even via various apps, making ordering the parts you need super easy. Let us help make your aftermarket dream possible. Let us help you build your dream machine. We want you to drive the truck or Jeep of your dreams right now. So when you get it installed and love it, make sure you share us some pics on social media so we can live vicariously through you. Because we too are aftermarket enthusiasts, truck and Jeep owners, who love and own many of the products we sell. In other words, we don’t just work aftermarket--we are aftermarket.

    Midwest Aftermarket's collection of air intakes, pickup bed covers, truck running boards, and much more includes all the leading styles and brands. Midwest Aftermarket is the #1 online retailer for aftermarket truck and Jeep accessories, selling products at the lowest prices and providing the best customer service in the industry. With the goal to provide the highest quality product with the fastest shipping at affordable prices, look no further for your vehicle’s aftermarket accessories. From UTV’s to Jeep-fanatics to F150’s or Chevy Silverado’s, Midwest Aftermarket will give you the customer support you deserve. Ask us about our new 2 day shipping options available on many of our fine aftermarket accessories.

    To Top